English language

How to pronounce tailstock in English?

Toggle Transcript
Type Words
Type of support

Examples of tailstock

tailstock
If the part is long then it may be supported with the help of an accompanying tailstock.
From the en.wikipedia.org
The tailstock can be slid along the axis of rotation and then locked in place as necessary.
From the en.wikipedia.org
The tailstock is a toolholder directly mounted on the spindle axis, opposite the headstock.
From the en.wikipedia.org
This is facilitated by hardened and ground ways which restrain the carriage and tailstock in a set track.
From the en.wikipedia.org
This is facilitated by hardened and ground bedways which restrain the carriage and tailstock in a set track.
From the en.wikipedia.org
Traditionally, a hard dead center is used together with suitable lubricant in the tailstock to support the workpiece.
From the en.wikipedia.org
The bed is a robust base that connects to the headstock and permits the carriage and tailstock to be moved parallel with the axis of the spindle.
From the en.wikipedia.org
Woodturning lathes specialised for turning large bowls often have no bed or tailstock, merely a free-standing headstock and a cantilevered toolrest.
From the en.wikipedia.org
The bed is a robust base that connects to the headstock and permits the carriage and tailstock to be aligned parallel with the axis of the spindle.
From the en.wikipedia.org
More examples
  • Support consisting of the movable part of a lathe that slides along the bed in alignment with the headstock and is locked into position to support the free end of the workpiece
  • A tailstock, also known as a foot stock, is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine.
  • The portion of a cetacean's body between the dorsal fin and the fluke (tail). See also: caudal peduncle
  • A moveable locking/clamping assembly on a lathe that slides up and down the bedway. The tailstock houses the tailstock quill or ram, which is adjustable in and out by means of a hand wheel that exerts pressure on a project for support during turning. ...
  • Used when spindle turning on the wood lathe. Moves along the ways or bed to adjust to the size of the wood being turned.