Stamper says the patch likely would have been created even without the new bill.
From the investors.com
Stamper is the eighth person to be cleared of suspected foot and mouth infection.
From the newscientist.com
Stamper said a Kentucky player called Florida's defense fast but not physical.
From the orlandosentinel.com
Stamper helped the Flyers reach the state tournament where she finished sixth.
From the kentucky.com
Each stamper was connected to the cam shaft which was turned by a water wheel.
From the en.wikipedia.org
Stamper started at middle linebacker against Hawaii in place of Spikes.
From the orlandosentinel.com
Stamper had 18 and 14 rebounds and Spencer had 16 points and 10 rebounds.
From the kentucky.com
Stamper will play virtuoso piano works by Chopin, Liszt and Rachmaninoff.
From the orlandosentinel.com
The mold closes with a metal stamper in contact with the disc surface.
From the en.wikipedia.org
More examples
A workman whose job is to form or cut out by applying a mold or die (either by hand or by operating a stamping machine)
Someone who walks with a heavy noisy gait or who stamps on the ground
Stamping machine: a power tool that stamps; "a metal stamper"
(Stampers) These are the metal plates that are formed from the glass master. These metal stampers are used to press the data to the disc during the plastic injection molding process.
Early machine for making pulp, consisting of several sets of large wooden hammers falling into mortars filled with rags. Superseded by the beater.
The electroformed part made from a mother and containing a reversed data image of the final disc. Becomes part of a mold for the injection molding replication process.
A stamper is used to "press" the vinyl. Pressing vinyl records over and over again is hard on metal stampers. Causing them to wear out, split, become scratched, etc. For a regular weight LP, one can press approximately 1000 records per set of stampers before we start to lose sound quality. ...
Since a glass master is too delicate to be used for heavy duty disc production, durable metal molds called stampers are usually made for disc stamping or pressing.
The data-bearing removable "die" used during the injection moulding of a CD to imprint pits and lands into the polycarbonate substrate of the disc. In manufacturing CD-R media, instead of pits and lands, a continuous spiral is pressed into the substrate as a guide to the recorder's laser. ...