English language
Toggle Transcript
Examples of preheat
preheat
Half an hour before the end of the second rise, preheat the oven to 475 degrees.
From the thenewstribune.com
These dishes can be fully prepped in the time it takes for the grill to preheat.
From the sfgate.com
Preheat griddle to 375 degrees or set a nonstick frying pan to medium-high heat.
From the heraldtribune.com
Prepare or preheat grill for low indirect grilling, or about 250 to 275 degrees.
From the kentucky.com
Preheat the grill to hot and grill the bacon rashers until cooked, turning once.
From the expressandstar.com
Preheat oven to 500 degrees with one rack placed in the upper third of the oven.
From the post-gazette.com
Preheat the oven to 350 degrees, and bake for 25 to 30 minutes, or until golden.
From the theatlantic.com
Preheat oven to 350 degrees and line a rimmed baking sheet with parchment paper.
From the sacbee.com
When you are ready to assemble the sandwiches, preheat the oven to 350 degrees.
From the thenewstribune.com
- Heat beforehand; "Preheat the oven!"
- To heat something in preparation for further action, especially cooking
- (Preheating) The application of heat to a base metal prior to a welding or cutting operation.
- (Preheating) Warming of parts prior to application of coating, recommended when adhesion is critical and when parts are being coated in humid atmospheres. In some cases, this technique can be used to achieve higher-than- normal film builds.
- (Preheating) Heating to an appropriate temperature immediately prior to austenitizing when hardening high- hardenability constructional steels, many of the tool steels, and heavy sections.
- (Preheating) General term used to describe heating applied as preliminary to further thermal or mechanical treatment.
- (Preheating) The heating of an impregnated material prior to molding, to facilitate the operation or to reduce the molding cycle.
- (Pre-Heating) A common process in which either the weld zone, or whole pieces of thick metal, aluminum or iron castings are preheated in an oven or with a large torch-flame to prevent thermal stresses or uneven expansion and contraction.
- (Preheating) A high-temperature soaking treatment used to change the metallurgical structure in preparation for a subsequent operation, usually applied to the ingot.
