English language

How to pronounce platen in English?

Toggle Transcript
Type Words
Type of plate
Type Words
Type of roller
Type Words
Type of table

Examples of platen

platen
The process starts with the strap compressed between the platen and the anvil.
From the en.wikipedia.org
The heated lamination press has the Dufex embossing plate on its upper platen.
From the en.wikipedia.org
I stuff my ears with earplugs and then lean over the platen as the printing begins.
From the theatlantic.com
The platen must have rounded edges and corners to prevent the vacuum from tearing the bag.
From the en.wikipedia.org
The platen and paper moved while typing, like a manual typewriter.
From the en.wikipedia.org
The mechanical isolation of the tone-arm-platen assembly from the base had a further advantage.
From the en.wikipedia.org
Uit het Engelsch, met gekleurde platen naar Japansche originelen.
From the en.wikipedia.org
In order to print, thermo-sensitive paper is inserted between the thermal head and the platen.
From the en.wikipedia.org
The platen has a series of small slots cut into it, to allow the air under it to be evacuated.
From the en.wikipedia.org
More examples
  • Work table of a machine tool
  • The flat plate of a printing press that presses the paper against the type
  • The roller on a typewriter against which the keys strike
  • A platen (or platten) is typically a flat metal (or earlier, wooden) plate pressed against a medium (such as paper) to cause an impression in letterpress printing. Platen may also refer to a typewriter roller which friction-feeds paper into position below the typebars or print head.
  • (Platens) The mounting plates of a press to which the entire mold assembly is bolted.
  • (Platens) The flat plates on a vulcanizer that exerts pressure on the un-vulcanized rubber and frame.
  • Platens are the plates on the molding machine upon which the molds are mounted. Platens have a certian footprint depending on the capacity/tonnage of the machine and cannot be superceded for safe operation of the molding machine.
  • A flat plate of metal within the lamination press in between which stacks are placed during pressing.
  • (1) the flat plate of a printing unit of a printing press that serves to hold the substrate in position during printing or finishing; (2) a fixture on a T-shirt printing machine or device that supports the item to be printed; (3) base or heating element of a heat transfer press.