English language
Toggle Transcript
drawbar::noun | Spocien Dictionary
| Type | Words |
|---|---|
| Type of | bar |
Examples of drawbar
drawbar
The drawbar is then tightened, drawing the shank firmly into the spindle.
From the en.wikipedia.org
The spindle on the machine tool is built with a female taper and drawbar.
From the en.wikipedia.org
There are specific drawbar settings used on a Hammond console to get the correct sound.
From the en.wikipedia.org
Each individual tool must be fitted with a male taper and the proper adapter for the drawbar.
From the en.wikipedia.org
When a drawbar is incrementally pulled out, it increases the volume of its component waveform.
From the en.wikipedia.org
This tooling is somewhat similar to CAT tooling but requires a drawbar within the milling machine.
From the en.wikipedia.org
A given combination of drawbar settings creates a unique timbre, and is referred to as a registration.
From the en.wikipedia.org
A hollow drawbar passes back through the headstock to its back side, where a closer mechanism is mounted.
From the en.wikipedia.org
Receiver-type hitches use removable ball mounts, whereas the fixed drawbar type hitches have integrated ball mounts.
From the en.wikipedia.org
- A strong metal bar bearing a hook to attach something to be pulled
- A drawbar is a solid coupling between a hauling vehicle and its hauled load. Drawbars are in common use with rail transport, road trailers, both large and small, industrial and recreational, and with agricultural equipment.
- A drawbar or spindle drawbar is a clamping mechanism for toolholders on machine tools. The toolholder or machine taper itself is held by the drawbar and applies force to the spindle, especially when spinning at high speeds.
- An open-mouthed bar at the end of a car, which receives a coupling link and pin by which the car is drawn. ...
- (DRAWBARS) Variable sliders that provide pure 'flute' sounds at different footage levels to give rich organ sounds. First (and still) found on Hammond organs and many other makes too.
- A tractor component typically located at the rear and near the ground that permits attachment of implements for pulling or towing.
- A fixed or hinged tow bar extending out the rear of a tractor.
- A flat horizontal bar attached to the rear of the tractor, used for dragging or towing. May be attached to the frame at a fixed height, providing the ability to vary the distance between the tractor and implement to be towed. ...
- A beam across the rear of a vehicle or aircraft to which implements are hitched
